optical fiber laser marking machine manufacturer from China DongGuan FOHONG Digital Technology Co.LTD

Place of Origin:

Guangdong, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Used in the field for depth ,smoothness and high precision requirements, such as clocks, mould industry, the bitmap marking, etc.).

Applicable industry

Used in the field for depth ,smoothness and high precision requirements, such as clocks, mould industry, the bitmap marking, etc.).

Function

Acceptable font and the file format: all fonts in WINDOWS operating system /type (including national language/bar code, etc.);BMP/PCX with 256 grayscale image file and DXF/PLT vector graphics file format.

Technology parameters

Maximum laser power: 10W
Laser wavelength: 1060 nm
Beam quality: < 2
The laser repetition rate: 20 KHZ - 100 KHZ
Marking range: 110 mm * 110 mm / 150 mm * 110 mm
Engraving line speed: 7000 mm/s or less
Engraving depth: 0.2 mm or less
Minimum line width: 0.012 mm
Minimum characters: 0.15 mm
Repeat accuracy: + / - 0.003 mm
Electricity demand: single-phase / 220 v / 50 Hz / 4 a
The machine power: 500 w
The host system size: 500 mm * 500 mm * 300 mm
Cooling system size: 300 mm * 250 mm * 500 mm
Power supply: ac 90-260 - v / 50 Hz - 60 Hz
Electricity power: < 160 w
Exterior size: 570 mm * 270 mm * 200 mm
The weight: < 10.5 KG
Focusing spot diameter: < 0.01 mm
Marking speed: 30 mm / 30 mm - 300 mm / 300 mm optional
Marking area: > 800 characters per second
Semiconductor module life: > 500000 hours
Computer operating system: Win98 / Win2000 / XP
Cooling: built-in air cooling
Control interface: standard USB

Features
A new generation of revolutionary optical fiber laser marking machine system:

1, has small volume and long life of semiconductor module (> 500000 hours), low power consumption (160 q), high beam quality, USB interface, support WIN98/2000 / XP operating system;

2, is not affected by bad environment and temperature changes; It can be operated with battery or car cigarette lighter in the condition of power failure. Before Fiber laser appeared, the laser marking system is generally with continuous or pulse CO2 laser, Nd-YAG laser as the light source. Compared with the traditional laser light source, optical fiber laser performance is superior, hair scattered Angle is about a quarter of the semiconductor pump laser (more applicable precision, fine marking machine industry);Electro-optic conversion efficiency is 1/10 of the flash lamp pumped solid state laser marking machine; The work an average of up to 100000 hours;

3, fiber laser is air-cooled completely, without chiller, cooling water pipe and temperature controller and other supporting equipment, smaller, lower energy consumption, the use of user cost is much lower than using traditional laser light marking system.

4, 10-100 KHZ ETL fiber laser pulse repetition frequency, average 10-20 w output power of fiber laser product volume 58 cm * 280 * 56 cm, weight 10 kg; Because of the laser diode is the working voltage, optical fiber laser electro-optical efficiency as high as 70%, driving power in the condition of power can use UPS power support, power consumption of only 160W.

Sample proof